Complete Component Counting Solutions
Fast, Accurate, Reliable
Count SMD taped components and axial and radial through-hole taped components with Grip Technologies' series of component counters and rereelers. Our reel counter model GT-101 quickly counts taped SMD components and small quantities of axial and radial through-hole components. Need to count large quantities of through-hole, too? Our GT-103 reel counter does it all — both SMD and Through-Hole taped component counting.
Model GT-101 – Top Seller
The GT-101 counts SMD components quickly and accurately. Saves money by eliminating time-consuming, inaccurate hand counts. You can't be in the surface mount business without this tool!
The GT-101 package consists of the CC-15 component counter and the CB-112 SMD rereeler. It also includes a manual stand suitable for counting small quanitities of both axial and radial through-hole taped components. If your prime requirement is counting SMD components and perhaps small quantities (a few hundred) of through-hole components, the GT-101 is the system for you.
|
|
SMD Reel Counter 
Model GT-101
| |
Model GT-103 – Our Best Seller
Counts it all both through-hole and SMD. Your best choice for ease and convenience if you count both types of components.
The GT-103 package consists of the CC-15 component counter, the CB-112 SMD rereeler, and the CB-111 through-hole rereeler for both axial and radial through-hole taped components. If your requirement is to count both SMD and large quantities of through-hole components, the GT-103 is what you need.
|
|
BOTH SMD and Through-Hole 
Model GT-103
| |
Model GT-102 – Accurate Through-Hole Counting
The GT-102 counts large volumes of through-hole components quickly and conveniently.
The GT-102 package consists of the CC-15 component counter and the CB-111 through-hole rereeler. If your requirement is to count large quantities of taped through-hole components only (not surface mount) then the GT-102 is the system for you. NOTE: The CB-112 SMD rereeler can be added at a later time if your requirement changes.
|
|
Through-Hole Counter 
Model GT-102
| |
Model CC-15 Component Counter
A great value that lets you add
rereeler capabilities as needed.
This is the basic component counter and includes a
manual stand for counting both axial and radial
through-hole taped components. Both the CB-111
through-hole rereeler and the CB-112 SMD rereeler can be
added at a later time.
|
|
Component Counter 
Model CC-15 Component Counter
| |
Model CB-112 SMD Rereeler
For use with the CC-15 Component
Counter
The CB-112 rereeler is required for counting taped SMD
components. The CB-112 provides mounting for the CC-15
component counter's photocell assembly to allow a
sprocket wheel to rotate through the photocells's
aperture. The CB-112 also facilitates rereeling the
component tape (after counting) back onto the original
reel to assure proper component orientation for your
pick & place machine.
|
|
SMD Rereeler 
Model CB-112 SMD Rereeler
| |
Model CB-111 Through-Hole Rereeler
For use with the CC-15 Component
Counter
The CB-111 rereeler for through hole taped components
maximises the speed of your through hole counting
operations. The CB-111 accommodates both double taped
axial components and single taped radial components. The
CB-111 allows mounting of the CC-15 component counter's
photocell assembly to allow component leads to pass
through the photocell's aperture.
|
|
Through-Hole Rereeler 
Model CB-111 Through-Hole Rereeler
| |